Waterloc250 has lifting bars and an arrow moulded into the top
face. The cells are assembled by rotating them by 180° from the
nested stack. The cell connector actually consists of two clips;
the ‘pop-out’ clip in the centre is the base cell clip, for
securing the base layer, the remainder is the top cell connector,
required for the top layer only. No clips are required for the
intermediate cell layers.
Pipe connections can be made to allow inlet and outlet
connections at any position around the periphery of the tank. A
special feature of the spigot connector is a screw fixed mounting
plate that enables the geotextile or geomembrane liner to be easily
sealed around the connection prior to fitting the pipe. The Marley
Inlet chamber also provides a water entry method and / or access
for inspection.