Rainwater installation advice can be downloaded from the Rainwater brochure.

Notched gutter systems

It is possible to adapt the easyclip to make fittings suitable for ‘notch’ jointing, by fitting a ‘notch adaptor’ into the centre of the easyclip. The adaptor will then fit into a notch cut into the back of the gutter.

This is an effective way of allowing gutter to expand and contract due to temperature change without gutter and fitting pulling apart. There is also no need to anchor fittings to the fascia. This method is ideal to anchor the last joint of a gutter run which ends with a stopend.

Watch a video demonstration of notch jointing, to help you with your next project.